Home Paramters Fluoride WS200 Fluoride/pH/Conductivity 7-in-1 Portable Meter Kit

WS200 Fluoride/pH/Conductivity 7-in-1 Portable Meter Kit

SKU: 28APE190248 / AI4721 Categories: , ,



  • Patented 3-in-1 fluoride ion probe – no need for stirring or added reagents, directly measuring the ion concentration of fluoride in a quick and simple manner
  • Stable potential, fast response rate, convenient use; 2-point auto. Calibration for fluoride
  • Equipped with an atc ph and conductivity electrode, testing fluoride, ph, ec, tds,salinity, resistivity, orp (orp probe sold separately) & temperature altogether with high accuracy
  • Large backlit screen, 800 groups of data storage, self-diagnosis, parameter setup
  • Rugged portable design, suitable for both lab and field test; 800 groups of datastorage

The WS200 Fluoride/pH/Conductivity 7-in-1 Portable Meter Kit is designed for accurate and reliable measurement of fluoride, pH, conductivity, salinity, TDS, resistivity, ORP (ORP probe sold separately), and temperature altogether. The patented 3-in-1 Fluoride Ion probe is composed of an ion electrode, a reference electrode, and a temperature electrode, generating reliable readings with stable potential and fast response rate. Range: 0.02 ppm to 1900 ppm; Accuracy:±0.02 ppm, or ±5% of reading (whichever is greater).

Intelligent Functions — 2-point automatic calibration (0.19mg/L, 19.0 mg/L) for fluoride;3-point automatic calibration for pH (4.00, 7.00, 10.01 pH) and 1-pointcalibration for conductivity; 800 groups of data storage (measurements, temperature, units of measurements); auto. power-off; backlight adjustment; Self-Diagnosis; Fluoride units switchable from mg/L, ppm, ppt, and pF. Convenient Use — There is no need for probe stirring or added reagents during tests. You can directly measure your sample solutions’ fluoride ion concentration just like pH test (only takes 10 minutes to activate the fluoride probe before tests).

Rugged portable design with IP57 water resistant rating covered with a silicon case, which gives you a firm grip. Ideal for both lab and field use.

Additional information




Complete test kit:

  • WS200 Meter
  • F501 3-in-1 Fluoride Probe
  • 201T-S Combination pH Electrode (ATC)
  • 2301T-S Conductivity Probe (ATC)
  • Fluoride Ion calibration solutions (0.19mg/L and 19.00mg/L, 50ml for each)
  • pH calibration solutions (pH4.00, pH7.00, pH10.1, 50ml, one for each)
  • Conductivity Calibration Solution (1413μS/cm, 50ml)
  • Screw Driver
  • Back-up Batteries
  • Instruction Manual
  • Portable Case
Consent Management Platform by Real Cookie Banner
This site is registered on wpml.org as a development site.