LabSen® 551 pH insertion electrode for solid samples and soil measurements

LabSen® 551 pH insertion electrode for solid samples and soil measurements

SKU: 28APE190264 / AI3106 Categories: , , ,

Description

The LabSen® 551 pH insertion electrode from Apera Instruments is manufactured using proprietary Swiss sensor technology and materials. Reinforced by a PVC housing, the pointed electrode can be used to directly test semi-solid to solid samples such as soil, fruits, vegetables, etc.

LabSen S-Type Pointed Glass Diaphragm – Thanks to the low-resistance and rugged pointed glass diaphragm, the electrode delivers fully stabilized readings in 15 to 30 seconds, yet is up to 10 times more robust than conventional products, significantly reducing the likelihood of the electrode breaking during impact or when penetrating samples.

Polymer electrolyte with hole diaphragm structure – Allows direct contact with test samples without clogging the diaphragm structure. The electrolyte does not need to be refilled.

Long-life reference system – The LabSen 551 pH electrode uses a long-life reference system consisting of a glass tube, AgCl and a reference silver wire. The top of the slim glass tube is filled with cotton, which prevents the reaction between AgCl and electrolyte when the temperature changes. It improves the stability of the reference electrode and extends the life of the electrode.

  • Tip for direct measurements of soil, culture media, fruits, etc.
  • pH sensor technology and materials from Switzerland
  • Polymer electrolyte prevents clogging of the diaphragm
  • Blue gel electrolyte, does not flow and does not cause air bubbles
  • PVC housing is stable and dirt resistant
  • Long-life reference system that improves the stability of the reference electrode and extends the life of the electrode

The electrode uses a BNC connector that is compatible with all pH meters that use BNC connectors, such as Apera Instruments PH850, PC850, PH8500, PC8500, PH700, PH910, PC910, PH950, PC950,PH800, PH800, PC800, PH820 and PC820. A temperature sensor is not integrated. For automatic temperature compensation, a separate temperature sensor (e.g. Apera Instruments MP500) is required, or the temperature must be entered manually.

This electrode has a 6-month manufacturer’s warranty.

Technical Specifications

Measuring range (0 ~ 14) pH Electrolyte Polymer
Recommended operating temperature (0 ~ 80) °C Storage solution 3M KCl
Shank material PVC plastic Membrane resistance <250 MΩ
Glass membrane type S Electrode dimension Electrode (Ø15×90) mm
Measuring tip (Ø6×25) mm
Reference system Long Life Connection BNC
Diaphragm Ceramic+single pore Cable Ø3mm×1m

manual

Video

Compatible devices